• Our pre-engineered building system is unmatched in its speed and value.

Main Framing 

Rigid frame members are built-up sections made of high grade steel plate conforming to ASTM A 572M with Yielding Strength not less than 345 N/mm2. Main Framing can take any of the above common used geometry.

Secondary Framing 

Purlins and girts are one of secondary structural members made of high grade hot galvanized cold formed steel conforming to ASTM A 607 Grade 345 N/mm2. Secondary framing can take any of the above common used geometry.

Roof and Wall Single Skin Panels

The panels used in the construction of SUPPORTS pre-engineered buildings are composed of the following:

• Base metal of either Zinc-alume or Galvanized coated steel. An exterior surface coating on painted panels of 15 microns of epoxy primer with a highly durable polyester finish. 
• An interior surface coating on painted panels of 10 microns of epoxy primer and modified polyester or foam spec.

Building Accessories    

Building Accessories and special buyouts include sliding doors, roll-up doors, personnel doors, fiberglass insulation, louvers, windows and ridges ventilators.

Panel Related Accessories   

Eave gutters, downspouts, skylights, flashing and trims are produced from the same material (base metal, thickness, substrate coating, paint finish and color) as the wall panels of the building. Also some accessories are used to facilitate roof penetration avoiding water leakage, such as roof curb and roof jack. 

Roof and Wall Sandwich Panels  

The outer and inner metal skins of Sandwich Panels conform to the same specifications as the single skin painted panels described above. In addition, Insulated Panels have a factory injected Polyisocyanurate (PIR) core which has been recognized as the most resistant material to heat transmission.